Burco 111715, Instruction Manual

Page: 9 / 24

9
•
The mains lead should reach from the mains socket without straining the connections or creating a trip
hazard.
•
Keep the mains lead away from any hot surfaces.
•
Do not place the appliance near a hot gas or electric burner.
7.5 Electrical Connection
•
Check that the voltage on the rating plate of your appliance corresponds with your electricity supply
which must be A.C. (Alternating Current).
•
If the socket outlets are not suitable for the plug supplied with this appliance, the plug should be
removed and the appropriate one fitted.
•
WARNING: This appliance must be earthed.
•
The mains lead of this appliance will already be fitted with a BS1363 13A plug. If the fuse must be
replaced, use a 13-amp fuse complying with BS 1362.
•
A residual current device (RCD) should be used with this unit.
•
The RCD must be plugged directly into the socket and the appliance plugged directly into the RCD.
Important: The wires in the mains lead are coloured in accordance with the following code:
•
The wire which is coloured green and yellow must be connected to the terminal in the plug which is
marked with the letter E or the earth symbol or coloured green or green and yellow.
•
The wire which is coloured blue must be connected to the terminal which is marked with the letter N or
coloured black or blue.
•
The wire which is coloured brown must be connected to the terminal which is marked with the letter L
or coloured red or brown.
Wire Colour Wire Name Wire Code
Green & Yellow Wires Earth E
Blue Wire Neutral N
Brown Wire Live L