background image

Page 17

PROGRAMMING (cont.)

DRIP TIME - Drip time is the time allotted to allow for any excess coffee to drip from the funnel after 
a brew has been completed. The operator will be able to add up to 5 minutes worth of time. If no 
time is added the brew will complete and funnel locks will raise. 

FRESHNESS - This time is used to help control beverage quality. An alert will pop-up full screen and 
state that the recipe has expired. Once acknowledged, the operator can brew as normal.

REVIEW - Selecting this icon will give the operator another method of setting a recipe. This method 
uses a table layout that shows the parameters and the values that are set. Selecting the white area 
will take the operator directly to the edit page for that parameter. The operator can change the value, 
SAVE, and exit back to the recipe review screen.

MACHINE SETTINGS

Selecting Brew Settings will take the user directly to the Set Temperature screen. This screen allows the setting of 
the temperature that the tank attempts to heat to and maintain, and at what threshold the system allows brewing 
to occur (if brew lockout is on). The tank set temp is the set point that the heater tries to control to, and the ready 
temperature is how much below the set temp that the system allows brews to occur, depending on whether or 
not the brew lockout (also known as temperature lockout) feature is active.
 
HOW TO ACCESS BREW SETTINGS
1.  Touch the BUNN logo for 2 seconds to enter SERVICE ACCESS. 
2.  Select the ADVANCED icon.
3.  At the PASSWORD ENTRY screen, select ENTER (If a password is required, enter the code at this screen).
4.  In the SERVICE MENU screen, select the MACHINE SETTINGS icon.
5.  The MACHINE SETTINGS screen will appear on the display. There will be a menu of icons that represent 

settings you can enable, disable or modify.

REGIONAL SETTINGS - Regional settings will allow the user to change the language, time & date, 
units, and password for the brewer. Selecting each button will navigate the user to that respective 
category. The BUNN programming button will navigate the user to the main home screen.

MACHINE

SETTINGS

REGIONAL SETTINGS

BREWER SETTINGS

BREW SETTINGS

55502

 000000

Summary of Contents for ITCB DV




















Reviews: