Page 20
ENTER ASSET # ?
NO YES
This function allows the you to enter in an optional asset number. This can
be useful for tracking the usage or service of an individual machine within
a group.
This function allows the operator to enter in the telephone number to call if
service is needed. The service number will be displayed anytime there is a
fault message displayed.
Procedure to enter the service number:
1. Press and hold the right hidden switch until the display reads "Brew-
LOCKOUT" then release. Press and release the right hidden switch until
the display reads: "ENTER SERVICE #?"
2. Press and release "YES" switch. The display will now read "SCROL THRU
#'S NEXT - > NEXT NUMBER", followed by "SCROLL DONE NEXT".
3. Press the "SCROLL" switch to increment the number. When the desired
number is shown, press and release the "NEXT" switch to move to the
next digit in the phone number.
4. Repeat Step 3 until the entire number is entered.
5. Press and release the "DONE" switch. The display will now read "EXITING
BrewWIZARD" and then "ENTER PASSWORD".
ENTER SERVICE #
NO YES
FACTORY DEFAULTS
NO YES
SERVICE TOOLS ?
NO YES
Allows the testing of individual components and the ability to check the
membrane switches for proper function. (Diagnostic tool for troubleshoot-
ing purposes only)
Reset ALL of the previously entered brew settings, ad message, calibrations,
etc. Factory-set default values will replace ALL previous settings.
NOTE:
Items not affected; Service #, Password, Language, Units, Asset #,
Counters and Serial Number.
INITIAL FACTORY DEFAULT VALUES
BREW LOCKOUT
NO
LANGUAGE
ENGLISH
UNITS
ENGLISH
SET TEMP
200° F (93.3° C)
READY DEGREE
195° F (90.6° C)
ENABLE ADS
NO
ENABLE SANITATION
NO
ENABLE ENERGY SAVER -
NO
REFILL
-
###
ENABLE BREWLOGIC
ON
DILUTION COUNTS
64
BREW
COUNTERS
0
ENTER ASSET # -
0
SERVICE #
-
PROGRAMMING (cont.)
48497.2 111017
