Page 12
This function allows the operator to prevent or allow brewing if the
water temperature is less than the set READY temperature. The
YES or NO should be flashing. Select YES to prevent brewing if the
water temperature is below the set READY temperature. Select NO
to permit brewing at any water temperature. When finished, press
and release DONE. This will step to the next function screen. To
return to the MAIN SCREEN at any time, press and release "EN-
ABLE BREW ON/ OFF".
BREW LOCKOUT?
NO
DONE
YES
NOTE: Access to the remaining functions in LEVEL 2 is intended for trained service personnel only.
SET LANGUAGE
NO YES
Choose between English or Spanish. After selecting "YES", press
either ( + ) or ( - ) to select, then choose "YES" again when asked,
"ARE YOU SURE?"
PROGRAMMING (cont.)
UNITS
METRIC DONE ENG
Choose between English or Metric units. Display will read:
"CHANG-
ING UNITS WILL CAUSE" "ALL SETUP INFO TO BE LOST" "ARE
YOU SURE?" "NO YES".
NOTE: If the brewer is set for Metric
Units, displays will be different. (ex: Brew oz will become Brew Liters,
° F will be ° C).
This function has two parts:
1. It allows the operator to view the brew settings for the various recipes
stored into the brewer.
2. It allows the operator to modify (change) any of the brew settings for a
particular recipe stored in the brewer.
Procedure for reviewing the recipes:
1. Press and hold the right hidden switch until the display reads
BREW
LOCKOUT?
Press and release the right hidden switch until the display
reads REVIEW RECIPES. Select YES.
2. The display should now read the name of the first recipe, along with
MODIFY SHOW and NEXT.
3. Select SHOW. The screen will scroll through all the brew settings for
that particular recipe. When finished, the display will return to the recipe
name just viewed.
4. To see the settings again, select SHOW. To change settings, select
MODIFY. Then the screen will display BREW OZ and a batch light will
be blinking.
5. Using (-) or (+), set the amount of brew water to be dispensed for that
batch size.
6. When finished, press the other batch size and repeat step #8.
7. When finished setting both batch sizes, select DONE. The display should
REVIEW RECIPES
NO YES
48497.2 111017
