Page 21
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET NEW RECIPE (to set a new COFFEE recipe using
a Smart Funnel or RECIPE CARD)
Using a Smart Funnel and a G9-2T DBC or MHG
Grinder:
This function allows the operator to set BREW VOL-
UMES, BYPASS PERCENTAGE, PULSE BREW TIMES
AND DRIP OUT TIMES for each coffee name preset in
the grinder’s memory.
Certain coffee names are stored in the grinder’s memory.
When a particular name of coffee is ground into the
Smart Funnel, that name and the batch size selected
are transferred from the grinder to the programming
CHIP located in the funnel handle. The funnel is then
inserted into the brewer’s funnel rails. The SENSING
COIL on the brewer reads the information contained in
the handle. The name of the coffee flavor will then ap-
pear on the display. This allows the operator to set the
BREW VOLUME, %BYPASS, PULSE BREW TIMES and
DRIP OUT TIME for that particular coffee name. It also
allows the operator to set other brewing parameters,
such as BREW TEMPERATURE, BREW LOCKOUT, etc
Each coffee name can be set individually to provide
optimum brewing quality.
SET NEW RECIPE?
NO YES
INSERT FUNNEL
WITH NEW NAME
QUIT SETUP?
YES
(COFFEE NAME)
NO YES
MUST GRIND INTO
FUNNEL FIRST
BEGIN SETUP OF
(COFFEE NAME)
2 BATCHES DONE?
NO YES
(COFFEE NAME)
SETUP COMPLETE
CYCLES THROUGH
TWO SCREENS
2 SEC>
FUNNEL DETECTED
FUNNEL
CONTAINS NAME
FUNNEL CONTAINS
NO NAME
SEE SEPARATE DIAGRAMS
FOR SETUP INSTRUCTIOS
SETUP BREW VOLUMES, BYPASS
PERCENTAGE, PULSE BREW
TIMES, AND DRIP OUT TIME
SET TEMP XXX°
(-) DONE (+)
38112.1 042105
