Page 36
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
ENABLE ADS (Continued)
Procedure to READ in a New Ad:
NOTE: Saving a new ad will erase any previously saved
ad in the brewer’s memory.
1. From the NEW AD? screen, press and release
CARD.
2. The display will show INSERT AD CARD. Place
the AD CARD vertically so that the top end of the
"chip" is beneath the sensing coil (located on the
underneath side of the front display panel).
3. After a short pause, the display will read CARD
CONTAINS AD. To view the ad, press and release
SHOW. To save the ad to the brewer's memory,
press and release SAVE. To cancel, Press QUIT.
4. After the ad is saved, the display will read AD SETUP
COMPLETE, and then will advance to to next pro-
gramming function, ENABLE SANITATION.
ENABLE ADS
NO DONE YES
NEW AD?
CARD NO WRITE
WITH NO FLASHING
PRESS DONE TO DIS-
ABLE THIS FUNCTION
AND ADVANCE TO
ENABLE SANITATION
CARD CONTAINS AD
SHOW QUIT SAVE
WRITE TOP LINE?
NO YES
A
SCROLL DONE NEXT
IF NO, RETURN TO
1ST ON TIME
WRITE BTM LINE?
NO YES
A
SCROLL DONE NEXT
(VIEW WRITTEN
ADVERTISEMENT)
ENABLE SANITATION
NO YES
WITH YES FLASHING
PRESS DONE
2 LINES 16 CHARS
AVAILABLE
AD SETUP
COMPLETE
SCROL THRU ALPHA
NEXT->NEXT LETTER
PRESSING NO WILL
ADVANCE TO
WRITE BMT LINE
PRESSING SHOW
WILL DISPLAY AD
SAVE?
NO EDIT YES
ADVERTISEMENT
SETUP COMPLETE
PRESSING NO WILL
RETURN TO
MAIN SCREEN
IF NEITHER LINE WAS
WRITTEN, DISPLAY
WILL ADVANCE TO
ENABLE SANITATION
PRESSING EDIT
WILL RETURN TO
WRITE TOP LINE?
PRESSING NO WILL
READ ADVERTIS-
MENT NOT SAVED!
THEN
.....
38112.1 042105
