Page 45
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BREW COUNTERS
This function allows the operator to track the total num-
ber of brew cycles completed, as well as the number of
batches brewed using each of the brew buttons. There
are six resettable counters, and one life counter that
is not resettable.
Procedure to view/reset the brew counters:
1. Press and hold the right hidden button until the dis-
play reads SET LANGUAGE. Press the right hidden
button until the display reads BREW COUNTERS.
2. Pressing NO will advance to the next program-
ming function, ENTER ASSET #?. Press YES to
view the first brew counter (TOTAL LIFE BREWS).
This number represents the total number of brew
cycles this brewer has completed. This counter is
non-resettable. Press NEXT to advance to the next
brew counter, <- <- BREW A (left side).
3. This counter represents the number of brews for
Brew A on the left side of the brewer. To reset the
counter to zero, press and release RESET. Press
and release NEXT to advance to the next counter.
4. Repeat step 3 for the remaining two left counters,
BREW B and BREW C.
5. Repeat step 4 for the three right side brew coun-
ters.
6. When finished, press NEXT to advance to the next
programming function, ENTER ASSET #. To exit
programming, press and release either ON/OFF
button to return to the MAIN SCREEN.
TOTAL LIFE BREWS
XXXX NEXT
BREW COUNTERS?
NO YES
<- <- XXX BREW A
RESET NEXT
<- <- XXX BREW B
RESET NEXT
<- <- XXX BREW C
RESET NEXT
ENTER ASSET #?
NO YES
PRESSING NO WILL
ADVANCE TO
ENTER ASSET #
BREW A XXX -> ->
RESET NEXT
BREW B XXX -> ->
RESET NEXT
BREW C XXX -> ->
RESET NEXT
38112.1 101005
