Page 10
For technical questions, please call 1-888-866-5797.
Item 64734
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Note:
Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
Troubleshooting
Problem
Possible Causes
Likely Solutions
Light won’t
turn on.
1. Power is not on.
2. Solar Power Cable
connection is loose.
3. LUX control is set
too close to .
4. Motion sensor not
detecting movement.
5. Battery pack not fully charged.
1. Check that Power Switch is set to ON or AUTO.
2. Plug in firmly at back of Battery Housing.
3. Turn LUX knob towards .
4. Adjust angle and direction of Motion Detector
Head, and increase sensitivity (SENS).
5. Keep Solar Panel clean and allow unit to charge in full
direct sunlight for 3 days with the Power Switch OFF.
Light turns on
during day.
LUX control is set too close to .
Turn LUX knob towards .
Light flashes
on and off with
clicking sounds.
Low battery.
With Power Switch set to OFF, allow unit to charge in
full direct sunlight for 3 days before further use.
Light stays
“ON”.
1. Duration time setting too long.
2. Frequent changes in heat being
detected.
3. Power Switch set to ON.
1. Turn TIME knob counterclockwise to
reduce the time the light stays on.
2. Check sensing area for possible heat sources such
as air vents, vehicles or objects in wind. Reposition
the Motion Detector Head if needed, and turn SENS
Knob counterclockwise to lower sensitivity.
3. Set Power Switch to AUTO.
Light turns ON
and OFF.
1. Changes in heat are being
detected from a fixed heat
source or moving object.
2. Sudden temperature change
due to storms or high winds.
1. Check sensing area for possible heat sources
such as air vents, vehicles or objects in wind.
Reposition the Motion Detector Head.
2. Turn Power Switch “OFF” until storm
passes. Mount in a sheltered location.
Follow all safety precautions whenever diagnosing or servicing the tool.
Disconnect Battery and Charger power supply before service.
SAFETY
OPERA
TION
MAINTENANCE
SETUP
