background image

Page 3

For technical questions, please call 1-888-866-5797.

Item 64734 
        

9. 

Maintain products with care.

 Keep the Solar 

Powered Security Light clean for better and safer 
performance. Inspect the Light periodically. If 
damaged, have it repaired by a qualified technician.

10. 

Do not overreach.

 Keep proper footing and 

balance at all times. If a ladder is to be used during 
installation, it should be supported by an assistant.

11. 

Do not set up the Solar Powered Security Light 
if under the influence of alcohol or drugs.

 Read 

warning labels on prescriptions to determine if your 
judgement or reflexes are impaired while taking 
drugs. If there is any doubt, do not set up the Light.

12. 

Have your power tool serviced by a 
qualified repair person using only identical 
replacement parts.

 

This will ensure that the 

safety of the power tool is maintained.

13.  The warnings, precautions, and instructions 

discussed in this instruction manual cannot 
cover all possible conditions and situations 
that may occur.  It must be understood by the 
operator that common sense and caution are 
factors which cannot be built into this product, 
but must be supplied by the operator.

14.  Contains Li-Ion battery.  Battery must be 

recycled or disposed of properly.  Do not open, 
crush, heat above 140°F or incinerate.

 SAVE THESE INSTRUCTIONS.

SAFETY

OPERA

TION

MAINTENANCE

SETUP

Summary of Contents for LED-SOLAR













Reviews: