Bunker Hill Security 67139 Page 35 Set Up And Operating Instructions Manual Download

Page: 35 / 38

SKU 67139

For technical questions, please call 1-800-444-3353.

Page 35

maintenance/servicing

Procedures not specifically

explained in this manual

must be performed only by a

qualified technician.

tO prevent

seriOus injurY

FrOm accidental

OperatiOn:

unplug the unit from its

electrical outlet before

performing any inspection,

maintenance, or cleaning

procedures.
tO prevent seriOus

injurY FrOm unit Failure:

do not use damaged

equipment. if abnormal noise

occurs, have the problem

corrected before further use.

cleaning and maintenance

BEFORE EACH USE, inspect the

general condition of the unit, includ-

ing connections, wiring and cameras.

Check for loose or damaged hard-

ware, damaged electrical wiring, and

any other condition that may affect its

safe operation.

warning! if the supply cord of

this dvr is damaged, it must be

replaced only by a qualified ser

vice technician.

ntsc/pal Output select

This unit is set to NTSC video format. It

can be changed to PAL by changing the

jumper JS1 setting. This change must be

made by a qualified technician. To make

this adjustment:

Open the cover.

Slide the switch to NTSC or PAL as

needed for your system.
Replace and secure the cover.

Summary of Contents for 67139







































Search results

Summary of Contents for 67139

Reviews:

Related manuals for 67139

Brands by name

Popular brands

Bunker Hill Security 67139, Set Up And Operating Instructions Manual

Search results

Summary of Contents for 67139

Reviews:

Related manuals for 67139

Brands by name

Popular brands