RLM419p-Manual-E
Page 2 / 13
Introduction
The RLM is a small but powerful dry film laminator especially made for small companies, schools,
research and development departments. All commercial laminates for PCB manufacture and
mould-etching part technique can be processed. Due to adjustable pressure control and ad-
justable laminating speed, solder mask application is also possible without problems.
Features:
Electrically heated lamination rollers with uniform temperature distribution
Adjustable lamination pressure
Wrinkle free lamination due to separation of transport and heating rollers
patented heating roller system with sturdy ceramic heating elements
Infra-red sensors for fast and precise temperature control
Easy and fast mounting of resist rollers of nearly all coil diameters
Detachable inlet table for easy access to low resist roll
step-less adjustable laminating speed
digitally adjustable roller temperature with actual and set-point display and programmed control be-
haviour
starting 2012: Reverse drive for transport
Technical Data
Lamination width max.:
400 mm
Transport width max.:
440 mm
Lamination speed:
0.2-1.2 m/min adjustable
Resist tension:
adjustable
Lamination pressure:
adjustable
Temperature range:
20-145 °C (factory set max. temperature 120°C)
Power supply:
230 V 50 Hz, 2 kW
Weight:
38 kg
Dimensions (W x D x H):
69 x 63 x 57 cm
Laminat mounting coil inner-
Ø
75 and 133 mm (3" and 5 ¼"); max. laminate width 400mm
Board thickness:
0.3 – 5 mm
Board size:
Min 50 x 50mm; max. 450mm x endless
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 2292 / 9 28 28-0, Fax: +49 2292 / 9 28 28-29
, E-mail: [email protected]