Bungard HOT AIR 3000 Translation Of The Original Instructions Download Page 1 | Manualshive

Page: 1 / 15

Bungard HOT AIR 3000 Translation Of The Original Instructions Download Page 1

Manual-HotAir-3000-en

Page 1 / 15

QUARZ REFLOW OVEN
HOT AIR 3000

Translation of the Original Instructions

Tabel of Content

Prospect.....................................................2
Technical Data............................................2
EG-Declaration of Conformity.....................3
Intended Use of Machine............................4
Sicherheitshinweise....................................4
Scope of delivery........................................6
Installation..................................................6
Overview.....................................................7
Description of the function keys..................7
The temperature curve ..............................8

Setting of Parameters.................................9
Reflow-Process.........................................11
Characteristics of soldering alloys............12
Temperature curve parameters................13
Cleaning and Maintenance.......................13
Error message..........................................14
Spare Parts ans Options...........................14
Guarantee.................................................14
Disclaimer of Warranty.............................14
Copyright..................................................15

Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany

Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]

1
2
3
...
»

Summary of Contents for HOT AIR 3000
















Reviews:

No comments