Manual-HotAir-3000-en
Page 4 / 15
Intended Use of Machine
The HotAir3000 is a soldering furnace for SMD components and also designed for lead-free solder-
ing processes.
All other applications require our written consent or at the user's own risk.
Safety Regulations
IMPORTANT SAFETY INSTRUCTIONS FOR THE FORCED CONVECTION OVEN
Generally
Please read the following text carefully and pay particular attention to the instructions on safety at
work and on commissioning.
Please keep this manual at a safe place. It contains instructions that are also important for later
maintenance or cleaning work.
The machines are not intended for integration or interconnection with other machines or equipment.
They may only be operated in rooms equipped for this purpose and operated only by qualified spe -
cialist personnel (soldering skills). Children and pets are to be kept away!
Do not use the oven if it is damaged or does not work properly.
Avoid strong shocks and collisions. This could damage the glass heating rods. If the glass heating
elements are damaged, switch off the machine immediately and replace with original glass heating
rods.
Site
The oven must be level and dry and there must be enough space around the oven for service and
maintenance (about 1m on all sides). Do not use this device outdoors! The table must be able to
carry a weight of at least 30 kg. The oven should be used at normal room temperatures of 15 to 25
degrees.
It is not allowed and even dangerous to install the oven in a cabinet or box. Do not install this unit
near a heating element or stove, even in a damp environment.
Electricity
The machine is manufactured using tested parts according to the usual electrical safety regulations.
However, this does not relieve the user of his duty of care when handling electrically operated
devices.
The main switch disconnects the machine from the power supply. The protection of the circuit and
the fault circuit must be carried out by the customer (16A).
After completion of work, the main switch should always be switched off.
Before carrying out any work on the machine (cleaning, etc.), switch off the machine and pull out the
mains plug. The power outlet should be near the machine and accessible so that the plug can be
pulled quickly in an emergency. This stove must have its own socket, which may only be used by
this stove.
High voltage - the housing may only be opened by qualified persons. High voltages can cause death
or serious injury.
Keep the plug and power cord away from liquid. Avoid liquids entering through the door or through
the ventilation grilles.
Should this nevertheless happen once:
Immediately switch off the oven and unplug the appliance from the socket.
In case of damage, the power cord may only be replaced by qualified persons.
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
