manualshive.com logo in svg

Bulls 22-15-1054, Manual

Share
Download
Bulls 22-15-1054 Manual Download Page 128

MY22B01 - 22_1.0_27.08.2021

127

Operation

6.5.15.1 Adjusting the Suntour compression adjuster

Only applies to pedelecs with this equipment

 

Figure 146:  Suntour compression adjuster (1) on the rear 
frame damper

1

Set the 

compression adjuster

 to the middle 

position.

2

Ride the pedelec over a small obstacle.

Turn 

compression adjuster

 anti-clockwise.

The damping and compression hardness is 
reduced. The deflection stroke speed is 
increased. 

Turn 

compression adjuster

 clockwise.

The damping and compression hardness is 
increased. The deflection stroke speed is 
reduced. 

3

The ideal setting for the rebound damper has 
been achieved when the rebound movement of 
the rear wheel feels comparable to that of the 
front wheel.

1

Summary of Contents for 22-15-1054


































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands