In order to enable correct rocking, it is required to apply the rocking joints parallel to each other.
Internal spacing (center rocking joint to center rocking joint) single swing: 104 cm
Internal spacing (center rocking joint to center rocking joint) double swing: 186 cm
OD0821 ROCKfrog
© 2 0 2 1
K U R T B E I E R & K A T I Q U I N G E R
Template for fastening points on the ceiling:
Preparations, ceiling mounting:
The rocking joints have to be aligned parallel to
each other.
Mark the drilling and/or screwing points on the
ceiling by means of the provided template.
Use the markings S (104 cm) for the single swing.
Use the markings DS (186 cm) for the double swing.
Example for single swing (104 cm):
ATTENTION! In order to ensure a safe installation, please follow the individual steps in the instruction manual!
The piece of furniture should be assembled/installed by two persons of a specialist company/specialist staff!
Info:
Attention! The ceiling mount has to carry the weight of the swing as well as the weight of the occupant. Make
absolutely sure that the ceiling respectively the bean is solid and that it is possible to safely install the ceiling
mount. Every ceiling type is different. Have this imperatively checked by a specialist. No liability for personal injury
or damage to property shall be assumed in case of any improper installation.
Please note that a safety distance of 120 cm has to be observed all around the rope swing. No objects which may constitute
obstacles should be placed around the swing. The safety distance to the front and back depends on the respective rocking
behavior. However, up to a ceiling height of 250 cm, we recommend to observe a minimum distance of 120 cm to the front
and back. With increasing ceiling height, the safety distance to the front and back will also increase.
104 cm
S S
S S
Single swing: use the markings S (104 cm).
Double swing: use the markings DS (186 cm).
DS
DS
S
S