background image

OD0821 ROCKfrog

 ©  2 0 2 1

  K U R T   B E I E R   &   K A T I   Q U I N G E R

Safety Instructions!

Please observe the following safety instructions for your pleasure with ROCKfrog:

3. 

Before using the rope swing, please check again whether everything is mounted 

professionally.  

4.

Attention: the maximum load bearing capacity amounts to 110 kg per seat.

5. 

While rocking (with or without rope system), it is not allowed for anyone to stay within the 

swing’s range, next or below the rocking chair respectively swinging rocker (risk of injury).

6.

Attention! In case of any improper use, the runners may – also in case of the floor-based 

variant - also lead to injuries during the rocking (trapping risk).

1.

Please ensure a safety distance of 120 cm around the rope swing. Do not place any 

objects which may constitute obstacles in this area (around the swing).

2. 

Make sure that the power supply line is laid without causing hazards and that it may 

not get below the runner.

7.

Attention! There is a trapping risk around the foot-operated flap when the rocker is lowered. 

8.

Do not stand on the product or climb up or pull on the rope.  The floor-based rocker 

respectively swinging rocker is not a toy, gymnastics apparatus or climbing frame. Children
must not use the product without supervision of an adult.  
Do not sit on the arm- or backrest

Summary of Contents for OD0821 ROCKfrog















Reviews: