CEQUENT
™
PERFORMANCE PRODUCTS, INC.
7
Installation Instructions
Figure 2 - Mounting Hole Pattern and minimum surface areas
11.57
6.14
4.50
10.00
.41 x 4
DC9.0 & DC12.0 - Bottom View
Bolt Pattern & Minimum Mounting Surface - Pattern Is Not To Scale
IN
OUT
Figure 3 - Mounting Position
Roller
Fairlead
Under-Wound
CORRECT
1.3 Determine Mount Position
Failure to adequately align, support, or attach the winch to a suitable mounting base could
result in a loss of efficiency of performance or damage to the winch, wire/synthetic rope and
mounting surface.
The mounting surface must be equal to or greater than the footprint of the winch frame.
WARNING
3. The fairlead does not mount directly to the winch.
4. The wire/synthetic rope shall be under wound. Figure 4.
