CEQUENT
™
PERFORMANCE PRODUCTS, INC.
6
Mounting Hardware Requirements
Four (4) Winch Mounting Bolts and two (2) Fairlead Mounting Bolts, Nuts, and Washers are required.
Refer to Table 4 below for bolt quantity, sizes, and required torque. Mounting system will dictate bolt
length.
ALWAYS torque mounting bolts to the values specified for your winch in Table 4 to prevent vibration
during operation.
ALWAYS use class 8.8 metric (grade 5) or better hardware.
NEVER weld mounting bolts.
ALWAYS choose the proper bolt length for your application.
ALWAYS confirm required bolt length to ensure proper thread engagement.
Table 4 - Mounting Torque Requirements
Powered Winches
DC9.0
DC12.0
Winch Mounting Bolt Size
M10 x 1.5 pitch, 8.8 grade,
4 Required
M10 x1.5 pitch, 8.8 grade,
4 Required
Fairlead Mounting Bolt Size
M10 x 1.5 pitch, 8.8 grade,
2 Required
M10 x 1.5 pitch, 8.8 grade,
2 Required
Winch & Fairlead Mounting
Bolt Torque
40 ft./lbs.
40 ft./lbs.
BEFORE INSTALLING AND USING YOUR POWERED WINCH, READ AND
FOLLOW ALL MOUNTING INSTRUCTIONS AND SAFETY MESSAGES.
Mounting
To prevent accidental activation of the winch and serious injury, complete the winch installation
and attach the hook before installing the wiring.
1. Before Installation
WARNING
Installation Instructions
1.1 Inspect Parts
Hand Saver Cable Strap
Clutch Handle
Instruction/Owners Manual
Winch Assembly
Pendant Remote Control
Pendant Remote Control Socket
Roller Fairlead
Battery Lead
Mounting Hardware
Hook
WARNING
1.2.1 Winch and Fairlead Mounting Considerations
1.2 Select Mount Location
ALWAYS choose a mounting location that is sufficiently strong to withstand the maximum
pulling capacity of your winch.
WARNING
1. Your mounting surface must be equal to or greater than the footprint of the winch frame.
2. Make sure the motor, drum and gearbox housing are aligned correctly.
ALWAYS position fairlead with warning readily visible on top.
WARNING
