Warranty/Return
Authorization
The following chemicals have been tested and approved as cleaning agents for the
blower housing, belt and battery:
A. Process NPD (1.256) from Steris
B. Spor Klenz (undiluted) from Steris
C. Clorox liquid bleach at 10% concentration
D. Sani-Cloth HB wipes
E. 100% Methanol
F. 70% IPA
Once filter/cartridges have reached the end of their useful life, discard in ac-
cordance with federal, state, and local guidelines, and in conformance with plant
safety regulations.
Consult the appropriate CC20, RT or GR50 Series Hood User Manual for cleaning
instructions for the hood components.
Storage
When the blower is completely dry, store in a clean, dry area, away from direct
sunlight and sources of direct heat.
The storage temperature should be between 23º F to 129º F (-5º C to 54º C) with
humidity less than 90% RH.
Consult the appropriate CC20, RT or GR50 Series Hood User Manual for storage
instructions on hood components
One Year Limited Warranty
Bullard warrants to the original purchaser that the EVA Powered Air-Purifying
Respirator and Loose-Fitting Facepiece or Hood will be free of defects in material
and workmanship under normal use and service for a period of one (1) year from the
date of purchase. Bullard’s obligation under this warranty is limited to repairing or
replacing, at its option, articles that are returned within the warranty period and that
are, after examination, shown to Bullard’s satisfaction to be defective, subject to the
following limitations;
a) EVA Powered Air-Purifying Respirator and Loose-Fitting Facepiece or Hood must
be returned to the Bullard factory with shipping charges prepaid.
b) EVA Powered Air-Purifying Respirator and Loose-Fitting Facepiece or Hood must
not be altered from its original factory configuration.
c) EVA Powered Air-Purifying Respirator and Loose-Fitting Facepiece or Hood must
not have been misused, subjected to negligent use, or damaged in transport.
d) The date of purchase is within the one year warranty period. (A copy of the
purchaser’s original invoice showing the date of purchase is required to validate
warranty coverage.)
In no event shall Bullard be responsible for damages for loss of use or other indirect,
incidental, consequential or special costs, expenses or damages incurred by the
purchaser, notwithstanding that Bullard has been advised of the possibility of such
damages.
ANY IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO ONE (1) YEAR
FROM THE DATE OF PURCHASE OF THIS PRODUCT.
Some states do not allow the exclusion or limitation of incidental or consequential
damages, or allow limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you. This warranty gives you specific legal
rights, and you may have other rights which vary from state to state.
Return Authorization
The following steps must be completed before Bullard will accept any returned goods.
Please read carefully.
Follow the steps outlined below to return goods to Bullard for repair or replacement
under warranty or for paid repairs:
1. Contact Bullard Sales Support by telephone or in writing at:
Bullard
1898 Safety Way
Cynthiana, KY 41031-9303
Toll-free: 877-BULLARD (285-5273)
Phone: 859-234-6616
In your correspondence or conversation with Sales Support, describe the problem
as completely as possible. For your convenience, your sales support specialist will
try to help you correct the problem over the phone.
2. Verify with your sales support specialist that the product should be returned to
Bullard. Sales Support will provide you with written permission and a return
authorization number as well as the labels you will need to return the product.
3. Before returning the product, decontaminate and clean it to remove any hazardous
materials which may have settled on the product during use. Laws and/or
regulations prohibit the shipment of hazardous or contaminated materials. Products
suspected to be contaminated will be professionally discarded at the customer’s
expense.
4. Ship products to be returned, including those under warranty, with all transportation
charges pre-paid. Bullard cannot accept returned goods on a freight collect basis.
5. Returned products will be inspected upon return to the Bullard facility. Bullard
Sales Support will telephone you with a quote for required repair work which is not
covered by warranty. If the cost of repairs exceeds stated quote by more than 20%,
your sales support specialist will call you for authorization to complete repairs.
After repairs are completed and the goods have been returned to you, Bullard will
invoice you for actual work performed.
10
Cleaning
�
WARNING
Avoid contaminant entry into the breathing tube, as this will compromise
respiratory protection and could result in death or serious injury. Consult your local
safety professional if you suspect that contaminant has entered the breathing
tube.
When cleaning the equipment, do the following:
• Ensure water does not enter filter/cartridges. Replace wet filter/cartridges.
• DO NOT use gasoline, organic-based solvents, or chlorinated degreasing fluids
(such as trichloroethylene), as they will cause damage.
• DO NOT immerse the equipment in water or other cleaning fluid, as this may
cause contamination in the breathing tube and blower interior that will be
difficult to remove.
• Use a lint-free cloth moistened in a mild solution of soap and warm water to
clean the outer surface of the equipment.
Failure to observe the instructions and warnings in this manual invalidates all
performance statements and approvals for this equipment and could result in
death or serious injury.
