Bullard EVA Series User Manual Download Page 12

Page: 12 / 25

GR50 Parts and Accessories

GR50 Return Authorizations

RETURN AUTHORIZATIONS

IMPORTANT: THE FOLLOWING STEPS MUST BE COMPLETED BEFORE E.D. BULLARD COMPANY WILL

ACCEPT ANY RETURNED GOODS. PLEASE READ CAREFULLY.

Follow the steps outlined below to return goods to E.D. Bullard Company for repair or replacement under

warranty or for paid repairs:

1. Contact your Bullard Customer Service Coordinator by telephone or in writing at:

E.D. Bullard

1898 Safety Way

Cynthiana, KY 41031-9303

Toll-Free: 800-877-BULLARD

Phone: 859-234-6616

In your correspondence or conversation with your Customer Service Coordinator, describe the problem

as completely as possible. For your convenience, your coordinator will try to help you correct the

problem over the phone.

2. Verify with your coordinator that the product should be returned to Bullard. Customer Service will

provide you with written permission and a return authorization number as well as the labels you will

need to return the product.

3. Before returning the product, decontaminate and clean it to remove any hazardous materials which

may have settled on the product during use. Laws and/or regulations prohibit the shipment of

hazardous or contaminated materials. Products suspected to be contaminated will be professionally

discarded at the customer’s expense.

4. Ship returned products, including those under warranty, with all transportation charges pre-paid.

Bullard cannot accept returned goods on a freight collect basis.

5. Returned products will be inspected upon return to the Bullard facility. Your Customer Service

Coordinator will telephone you with a quote for required repair work which is not covered by

warranty. If the cost of repairs exceeds stated quote by more than 20%, your coordinator will call

you for authorization to complete repairs. After repairs are completed and the goods have been

returned to you, Bullard will invoice you for actual work performed.

GR50 Series Airline

Respirator User Manual

MB1

GRH01

Clamp

S18051

Belt

4612

Constant-Flow Control Valve

V30, V31, V32,

V33, V34, V35

Cooling Vest

DC70

Connector Hose

CH60

Dual-Cool™

DC5040

Frigitron

2000

AC1000
AC100031
AC100032

HC2400
HC240031
HC240032

20BT

MV2400

20BT

Lens Covers

20LC

Lens Covers

7714

V5 Coiled Air Supply Hose

V52530, V55030,

V52531, V55031,

V52532, V55032

Air Supply Hose

4696, 5454, 5457, 5458,

V2050ST, V20100ST

V30 Series Breathing Tube Assembly

Summary of Contents for EVA Series


























Search results

Summary of Contents for EVA Series

Reviews:

Related manuals for EVA Series

Brands by name

Popular brands

Bullard EVA Series, User Manual

Search results

Summary of Contents for EVA Series

Reviews:

Related manuals for EVA Series

Brands by name

Popular brands