WARNINGS continued
3
4. When connecting your respirator to the Free-Air
®
pump use only the
air supply hose and couplers required by the respirator manufacturer
and approved by MSHA/NIOSH.
Use of non-approved hose or couplers will void the respirator’s
MSHA/NIOSH Approval and could reduce the air flow to the respira-
tor, resulting in possible death or serious injury to the respirator
wearer.
5. DO NOT modify or alter this pump in any manner. Use only approved
Bullard Free-Air pump components and replacement parts on the
pump.
Failure to use approved Bullard components and replacement parts
invalidates all Bullard warranties, and may result in death or serious
injury to the respirator wearer.
6. If you have any questions concerning the use of this pump or your
respirator, or you are not sure the inlet filter is in a breathable
location, ask your supervisor.
All instructions for the use and care of this product must be supplied
to you by your employer as recommended by the manufacturer and
as required by Federal Law (29 CFR 1910.134).
For technical assistance or additional copies of this manual, call or
write:
E.D. Bullard Company
1898 Safety Way
Cynthiana, KY 41031-9303
1-800-827-0423 (Outside Kentucky)
In Kentucky 1-606-234-6611
Web site: http://www.bullard.com
