Bull R424-E2, Installation And User Manual, Page: 45 / 182

Chapter 5: Advanced Serverboard Setup
5-3
Figure 5-2. Installing he Serverboard in the Serverboard Node Drawer
Installing the Serverboard
Review the documentation that came with your serverboard. Become familiar 1.
with component placement, requirements, precautions, and cable connec-
tions.
Pull the serverboard node drawer out of the back of the chassis. 2. 2.
Remove the add-on card brackets: 3.
3a. Remove screw securing the add-on card bracket to the back of the node
drawer.
3b. Lift the bracket out of the node drawer.
Lay the serverboard in the node drawer aligning the standoffs with the 4.
serverboard.
Secure the serverboard to the node drawer using the rounded, Phillips head 5.
screws included for this purpose.
Install the adapter card associated with the serverboard if the chassis is a 6.
hot-swappable version. Refer to the next section for instructions on installing
the adapter card
Secure the CPU(s), heatsinks, and other components to the serverboard as 7.
described in the serverboard documentation.