Bull R424-E2, Installation And User Manual, Page: 117 / 182

Chapter 8: BIOS
8-5
This forces the system to wait until the 'F1' key is pressed if an error occurs.
The options are Disabled and Enabled .
Hit 'Del' Message Display
This feature displays "Press DEL to run Setup" during POST. The options are
Enabled and Disabled.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When
this item is set to Enabled, the ROM BIOS of the host adaptors will "capture"
Interrupt 19 at boot and allow the drives that are attached to these host adaptors
to function as bootable disks. If this item is set to Disabled, the ROM BIOS
of the host adaptors will not capture Interrupt 19, and the drives attached to
these adaptors will not function as bootable devices. The options are Enabled
and Disabled .
Power Confi guration
Power Button Function
If set to Instant_Off, the system will power off immediately as soon as the user
hits the power button. If set to 4_Second_Override, the system will power off
when the user presses the power button for 4 seconds or longer. The options
are Instant_Off and 4_Second_Override.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-
Off for the system power to remain off after a power loss. Select Power-On
for the system power to be turned on after a power loss. Select Last State to
allow the system to resume its last state before a power loss. The options are
Power-On, Power-Off and Last State .
Watch Dog Timer
If enabled, the Watch Dog Timer will allow the system to reboot when it is
inactive for more than 5 minutes. The options are Enabled and Disabled .