Bull Novascale R423-E2 Installation And User Manual Download Page 84

Page: 84 / 146

7-4

ovaS

ale R423-E2

Installation and User's Guide

7-3 Advanced Setup Configurations

Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu
items:



Boot Features

Access the submenu to make changes to the following settings.

QuickBoot Mode

If Enabled, this option will skip certain tests during POST to reduce the time
needed for system boot. The options are

Enabled

and Disabled.

QuietBoot Mode

This option allows the bootup screen options to be modified between POST

messages or the OEM logo. Select Disabled to display the POST messages.
Select Enabled to display the OEM logo instead of the normal POST messages.
The options are

Enabled

and Disabled.

AddOn ROM Display Mode

This sets the display mode for Option ROM. The options are

Force BIOS

and

Keep Current.

Bootup Num-Lock

This feature selects the Power-on state for Numlock key. The options are Off
and

Summary of Contents for Novascale R423-E2



















































































































































Search results

Summary of Contents for Novascale R423-E2

Reviews:

Bull Novascale R423-E2, Installation And User Manual, Page: 84 / 146

Search results

Summary of Contents for Novascale R423-E2

Reviews: