Bull Novascale R423-E2, Installation And User Manual, Page: 143 / 146

D-1
Appendix D: System Specifications
Appendix D. System Specifications
Note: unless noted specifications apply to a complete system (both server -
boards ).
Processors
Two Intel® 5500 Series (LGA 1366) processors, each processor supporting two
full-width Intel QuickPath Interconnect (QPI) @ 6.4 GT/s with a total of up to 51.2
GB/s Data Transfer Rate (6.4 GB/s per direction)
Chipset
Intel 5520 chipset, including two 5520 I/O Hubs (North Bridge) and one ICH10R
(South Bridge).
BIOS
.
32 Mb AMI SPI Flash ROM,
.
PCI 2.2, ACPI 1.02/2.0/3.0, Plug and Plat (PnP), DMI 2.3, USB Keyboard
support, and SMBIOS 2.3.
Memory
Eighteen 240-pin DIMM sockets support up to 144 GB of DDR3 Registered
ECC 1333/1066/800 MHz Memory modules (with maximum of 8 GB per DIMM
module).
Serial ATA Controller
Intel ICH10R supports six 3 Gb/s Serial ATA2 ports (RAID 0, 1, 10, 5 for
Windows, RAID 0, 1, 10 for Linux).)
SATA Drive Bays
Eight hot-swap drive bays to house six standard SATA drives
PCI Expansion
Three PCI-E 2.0 x8 slots (Slot 1/ Slot 3/Slot 7).
Two PCI-E 2.0 x16 slots (Slot 2/ Slot 6).
One PCI-E 2.0 x4 (in x8) slot (Slot 5).
One PCI-E 2.0 x8 (in x16) slot (Slot 4).
Serverboard
NovaScale R423-E2
Dimensions : 13.68 x 13.00 in (347.5 x 330.2 mm)