Bull Novascale Blade BL465, Installation And User Manual, Page: 74 / 128

60
novascale Blade BL465 - Installation and User's Guide
3.17.2 Installing the blade server cover
Use these instructions to install and close the cover for a blade server or for the topmost
blade server in a BL465 complex.
Attention:
You cannot insert the blade server into the Blade Chassis until the cover is installed and
closed or an expansion unit is installed. Do not attempt to override this protection.
To install and close the blade server cover, complete the following steps:
1. Before you begin, read the safety information that begins on page vii and Installation
guidelines on page 23.
2. Carefully lay the blade server on a flat, static-protective surface, orienting the blade
server with the bezel pointing toward you.
3. Lower the cover so that the slots at the rear slide down onto the pins at the rear of the
blade server, as shown in the illustration. Before you close the cover, make sure that all
components are installed and seated correctly and that you have not left loose tools or
parts inside the blade server.