14
INSPECTION AND CLEANING OF BURNERS AND GAS VALVES ORIFICES
CAUTION – Always turn off the gas supply prior to clearing Burners.
BURNER REPLACEMENT INTO INSERT
(1)
Replace burners back into the insert assembly. There is no need to replace the cotter pin back into the cast peg,
it is for shipping purposes only.
(2)
Check the burners for proper location after replacing. Make sure the valve orifices are inside of the
burner tubes (see drawing below). If the valve orifices do not fit inside the burner tubes, lighting the
burners may cause explosion and/or fire.
J