Bull 32X SCSI-2 CD-ROM Drive, Installation And Using Manual

Page: 28 / 41

Handling Compact Discs
Compact discs are high-density media that must be handled with care and kept clean to
ensure that they remain readable. Use the following precautions to ensure reliability:
v
Hold the compact disc by the edges.
v
Do not touch the surface of the compact disc.
v
To remove dust or fingerprints, wipe the compact disc from the center to the outside
of the compact disc, as shown.
Attention: Wiping the compact disc in a circular direction can cause loss of data.
v
Do not write on the surface.
v
Do not store or place the compact disc in direct sunlight.
v
Do not use benzene, thinners, or other cleaners to clean the compact disc.
v
Do not bend the compact disc.
Loading a Compact Disc Horizontally
To load a compact disc into a horizontally mounted drive, do the following:
1. Press the Load/Unload button to open the tray. The tray slides out of the drive.
2. Place the compact disc in the tray with the label facing up.
3. To close the tray, press the Load/Unload button, or gently push in the tray.
Note: Be sure that none of the vertical retaining tabs are extended when you use the
drive in the horizontal position. See “Extending the Vertical Retaining Tabs” on
page 11
16
32X SCSI-2 CD-ROM Drive Installation and Using Guide