Bull 32X SCSI-2 CD-ROM Drive, Installation And Using Manual

Page: 23 / 41

Extending the Vertical Retaining Tabs
You can install the drive so that it operates in either a horizontal or vertical orientation.
When the drive is operated in a vertical orientation, two retaining tabs on the CD-ROM
tray must be extended to hold the compact disc during loading and unloading.
To extend the retaining tabs, do the following:
1. With the system-unit power on, press the Load/Unload button on the drive to eject
the tray.
2. With a ball point pen or similar object, extend the two lower vertical retaining tabs.
Note: Do not extend the two upper tabs when you operate the drive in the vertical
position. Do not extend
any of the tabs when you operate the drive in the
horizontal position.
Chapter 3. Installing the 32X SCSI-2 CD-ROM Drive
11