manualshive.com logo in svg

Bull Cedoc NovaScale R423, Installation And User Manual, Page: 6 / 144

Share
Download
Bull Cedoc NovaScale R423 Installation And User Manual Download Page 6

N

ovaS

c

ale R423 Installation and User's Guide

iv

Chapter 5:  Advanced Serverboard Setup

Chapter 5 provides detailed information on the NovaScale R423 serverboard 

serverboard, including the locations and functions of connections, headers and 

jumpers. Refer to this chapter when adding or removing processors or main memory 

and when reconfi guring the serverboard.

Chapter 6:  Advanced Chassis Setup

Refer to Chapter 6 for detailed information on the NovaScale R423 server chassis. 

You should follow the procedures given in this chapter when installing, removing or 

reconfi guring SATA or peripheral drives and when replacing system power supply 

units and cooling fans.

Chapter 7:  BIOS

The BIOS chapter includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup Utility.

Appendix A:  BIOS POST Messages

Appendix B:  BIOS POST Codes

Appendix C:  Intel HostRaid Setup Guidelines

Appendix D:  Adaptec HostRaid Setup Guidelines

Appendix E:  System Specifi cations

Summary of Contents for NovaScale R423

















































































































































Reviews:

No comments