Bull Cedoc Novascale R422, Installation And User Manual

Page: 85 / 134

BIOS POST Messages
A-3
Allocation Error for: device
Run ISA or EISA Con fi guration Utility to resolve resource con fl ict for the speci fi ed device.
CD ROM Drive
CD ROM Drive identi fi ed.
Entering SETUP ...
Starting Setup program
Failing Bits: nnnn
The hex number nnnn is a map of the bits at the RAM address which failed the memory
test. Each 1 (one) in the map indicates a failed bit. See errors 230, 231, or 232 above for
offset address of the failure in System, Extended, or Shadow memory.
Fixed Disk n
Fixed disk n (0-3) identi fi ed.
Invalid System Con fi guration Data
Problem with NVRAM (CMOS) data.
I/O device IRQ con fl ict
I/O device IRQ con fl ict error.
PS/2 Mouse Boot Summary Screen:
PS/2 Mouse installed.
nnnn kB Extended RAM Passed
Where nnnn is the amount of RAM in kilobytes successfully tested.
nnnn Cache SRAM Passed
Where nnnn is the amount of system cache in kilobytes successfully tested.
nnnn kB Shadow RAM Passed
Where nnnn is the amount of shadow RAM in kilobytes successfully tested.
nnnn kB System RAM Passed
Where nnnn is the amount of system RAM in kilobytes successfully tested.
One or more I2O Block Storage Devices were excluded from the Setup Boot Menu
There was not enough room in the IPL table to display all installed I2O block-storage
devices.
Operating system not found
Operating system cannot be located on either drive A: or drive C:. Enter Setup and see if
fi xed disk and drive A: are properly identi fi ed.
Parity Check 1 nnnn
Parity error found in the system bus. BIOS attempts to locate the address and display it on
the screen. If it cannot locate the address, it displays ???? . Parity is a method for checking
errors in binary data. A parity error indicates that some data has been corrupted.