13
When this product reaches the end of it’s life or is
disposed of for any other reason, it must not be
disposed of in household waste. In
order to preserve natural resources, and to minimise
adverse environmental impact, please recycle or
dispose of this product in an environmentally
friendly way. It should be taken to your local waste
recycling centre or other authorised collection and
disposal facility.
If in doubt consult your local waste authority for
information regarding available recycling and / or
disposal options.
GENERAL SAFETY INSTRUCTIONS
Before attempting to operate this machine, you must
read, understand and follow these instructions very
carefully as they are intended to ensure your safety
and that of others and also a long and trouble-free
service life of the machine.
Learn how to use the power tool, its limitations and
potential hazards.
Keep these instructions in a safe place for future
reference.
Avoid unintentional starting - Unplug the power
tools
Before starting the power tool, always make sure
that you have removed the key and adjusting
wrenches.
Before plugging the tool into the mains supply,
always make sure that the switch is in the OFF
position.
Make sure that power tools are disconnected from
the mains supply when not in use, prior to servicing,
lubrication or adjustment and when replacing
accessories such as blades, bits and cutters.
Check damaged parts
Before using the power tool, always inspect it
carefully to determine that it will operate properly
and perform its intended function.
Check correct alignment of moving parts, making
sure they do not bind. Check for any damaged
components and make sure that the power tool has
been correctly assembled.
Check for any condition that may affect operation of
the power tool.
Unless otherwise indicated in this instructions
handbook, a guard or any other part of the power
tool that has been damaged must be repaired or
replaced by an authorized service center.
Any switch that does not work correctly must be
replaced by an authorized service center.
Do not use the power tool if the ON/OFF switch
does not turn the power tool ON and OFF.
Dust generated when machining materials is a
health hazard.
Always wear a suitable dust mask.
When working, always wear personal protective
equipment:
safety goggles, gloves, mask, ear protectors, non-
slip safety shoes.
Never wear loose clothes or jewelry that may be
trapped in moving parts; long hair must be tied back.
Always work on a stable base.
Always fasten the workpiece securely with a clamp.
Keep the work area clean and tidy.
Always use the power tool with both hands.
Never open or modify the power tool or its
accessories in any way.
Do not expose the power tool to rain, or use in
damp or wet locations. Keep the work area well lit.
Do not use power tools in areas where there is a
risk of explosion or fire from combustible materials,
flammable liquids, paint, varnish, petrol etc.
flammable gases and dust of an explosive nature.
Beware children and pets
Children and pets should be kept out of the work
area.
All power tools should be kept out of the reach of
children and, preferably, stored or locked in a
secure cabinet or dry room when not in use.
Use the right tool
Select the right tool for the job. Do not use a tool for
a job for which it was not designed. Do not force a
small tool to do the
job of a heavy-duty tool. Do not use tools for
purposes not intended.
Do not force the power tool
The power tool will do a better and safer job and
give you much better service if it is used at the rate
for which it was designed.
Maintain tools with care
Keep cutting tools sharp and clean for better and
safer performance.
Follow the instructions for lubricating and changing
accessories.
Keep handles dry, clean and free from oil and
grease.
Ensure that ventilation slots are kept clean and free
from dust at all times. Blocked ventilation slots can
cause overheating and damage to the motor.
If this machine is to be used when working at a
certain height, scaffolding fitted with railing and kick-
plate or a tower platform must be used in order to
guarantee suitable stability.
GUARD AGAINST ELECTRIC SHOCK
Avoid body contact with earthed or grounded
surfaces (e.g. pipes, radiators, dish-washers and
refrigerators).
Power Cords
Never yank or pull the power cord to disconnect it
from the mains supply socket.
Never carry the power tool by its power cord.
Keep the power cord away from heat, oil, solvents
and sharp edges.
Check the tool power cord periodically and if
damaged have it replaced by an authorized service
center.
Inspect extension cords periodically and replace if
damaged.
DO NOT use 2-core extension cords or reels on
power tools with an earth path. Always use a 3-core
