Buick 2015 Encore IntelliLink, Owner'S Manual

Page: 82 / 97

Black plate (81,1)
Buick Encore IntelliLink Infotainment System (GMNA-Localizing-U.S./Cana-
da-7639742) - 2015 - crc - 7/14/14
Infotainment System 81
Pairing a Phone
1. Press
b
/
g
. The system
responds “ Please Say a
Command, ” followed by a tone.
2. Say “ Pair. ” The system responds
with “ Please search for
Bluetooth devices on your
phone, select your vehicle,
confirm and enter the PIN
provided on the screen.
”
3. Start the search for Bluetooth
devices on the phone. Then
select the device and following
the instructions on the phone by
either entering the four-digit PIN
or confirming the six-digit
passcode. The PIN is used in
Step 4.
4. Locate and select the device
named after the vehicle make
and model in the list on the cell
phone. Follow the instructions
on the cell phone to enter the
PIN provided in Step 3 or to
confirm the six-digit code
matches. The system responds
“ successfully paired. ”
5. Repeat Steps 1 − 4 to pair
additional phones.
Listing All Paired and Connected
Phones
The system can list all cell phones
paired to it. If a paired cell phone is
also connected to the vehicle, the
system responds with
“ is connected ”
after that phone name.
1. Press
b
/
g
. The system
responds “ Please Say a
Command, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Device List. ”
Deleting a Paired Phone
If the phone name to delete is
unknown, see
“ Listing All Paired
and Connected Phones. ”
1. Press
b
/
g
. The system
responds “ Please Say a
Command, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Delete Device. ”
4. The system responds with: “ To
delete a device, please touch its
name on the screen.
” Select the
device to delete on the display
and it will be removed.
To cancel this command, press
$
/
i
on the steering wheel
control or press the
/
BACK button
on the radio faceplate.
Connecting to a Different Phone
or Device
To connect to a different cell phone,
the system looks for the next
available cell phone. Depending on
the cell phone to be connected, this
command may need to be repeated.
1. Press
b
/
g
. The system
responds “ Please Say a
Command, ” followed by a tone.
2. Say “ Bluetooth. ”
3. Say “ Change Phone. ”
. To select a device, select
the name on the display.