Black plate (5,1)
Buick Encore Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
6014813) - 2014 - crc - 10/22/13
Instruments and Controls
5-5
2. Press and hold SET/CLR while
the Set Area display is active.
3. Find the vehicle's current
location and zone number on the
map. Zones 1 through 15 are
available.
4. Use
w x
to change to the
correct zone number.
5. Press SET/CLR to confirm the
setting.
Clock
The infotainment system controls
are used to access the time and
date settings through the menu
system. See
“
Using the System
”
in
the infotainment manual.
Setting the Clock
To set the time and date:
1. Press the CONFIG button and
then turn the TUNE/MENU knob
to select Time and Date or
press
H
.
2. Select the desired feature.
3. Turn the TUNE/MENU knob to
adjust the highlighted number.
4. Press the TUNE/MENU knob to
select the next number.
5. To save and return to the Time
and Date menu, press
/
BACK
at any time or press the TUNE/
MENU knob after adjusting the
value.
6. Repeat steps 2
–
5 for the
remaining feature.
If auto timing is set, the time
displayed on the clock may not
update immediately when driving
into a new time zone.
Setting the 12/24 Hour Format
1. Press the CONFIG button and
select Time and Date or
press
H
.
2. Select Set Time Format.
3. Turn the TUNE/MENU knob to
highlight the 12 hour or 24 hour
display format.
4. Press the TUNE/MENU knob to
select display format.
Power Outlets
The accessory power outlets can be
used to plug in electrical equipment,
such as a cell phone or MP3 player.
There is one accessory power outlet
on the center stack below the
climate control. This outlet is
powered when the key is in ON/
RUN or ACC/ACCESSORY, or until
the driver door is opened within
