11
Tools required:
1 size 20
open-ended spanner,
1 size 3 allen key,
1 size 2.5 allen key,
1 four-way wheel brace size 2
Turn the lever (5) to open position.
Remove the countersunk screw (6) from the lever.
Remove lever (5).
Remove the countersunk screws (4) and the cover (3).
Loosen screw (1) and push back locking device (2).
Adjust thread insert (7) of thightening spindle clockwise for 1/6 turn.
Check whether the cover (8) closes perfectly by reinstalling the handle (5) and pressurizing the tool (Check that the thread insert does
not turn).
Reassemble in reverse order. Check that the lever is adjusted horizontal in open position when inserted.
Tighten screws (1) of locking device (2) after adjustment.
If the leak cannot be rectified, change the cover seal (9).
5.5 Changing the cover seal
If the change of cover pressure will not solve the leak, the cover seal has to be changed.
Tools required:
1 small screw-driver
Remove the cover gasket (9) by means of the screw-driver.
Renew the cover gasket (9).
6. Repairs
Repair work may only be performed by authorized personnel using original spare parts.
Repair work on the electrical equipment may only be performed by authorized electrical personnel using original spare parts. Repairs
must be performed in accordance with DIN standard 57701 and VDE 0701.
For your safety, send a faulty applicator to the manufacturer or your supplier for repair.
0DLQWHQDQFH6HUYLFLQJ5HSDLUV
