Buhler Versatile 2290, Operator'S Manual, Page: 72 / 380

SECTION 2 - OPERATION
2-14
Rear Window Wiper Switch
The rear windshield wiper switch, 2, is a three-
position switch. Position one (when the bottom of
the switch is flush with the dash) is the off
position. Position two (when the switch is in the
center rocker position) is low speed. Position
three (when the top of the switch in pressed flush
with the dash) is high speed.
NOTE: When the rear windshield wiper
switch is turned off, the wiper arm will always
stop on the left side of the rear cab window.
Figure 2-20
2
Front and Rear Windshield Washer Switch
The washer switch, 3, is a three position,
momentary-type switch. Position one (when
switch is in the center rocker position) is the off
position. Position two (when the top of the switch
is pressed flush with the dash) will provide
washer fluid to wash the front windshield.
Position three (when the bottom of the switch is
flush with the dash) will provide washer fluid to
wash the rear window.
Figure 2-21
3