Nivotemp NT MD
5.6.3 Set temperature unit
This is where the unit symbol for the temperature is configured:
Basic EF
b.EF
Basic Adv. Functions
t.uni
Temperature unit
Set Unit Temp
;_
;C - ;F
Selection menu
The options are:
Degrees
Celsius
Degrees
Fahrenheit
Note:
– Values are automatically converted and the measuring range adjusted. However, always check
the respective switching points and switch-back points.
5.6.4 Set display refresh rate
The refresh rate of the display can be changed based on the application. The display can also be completely disabled. The LEDs
will remain functional.
Basic EF
b.EF
Basic Adv. Functions
Di5
Display rate
Display Rate
____
FASt - oFF
Selection menu
The options are:
fast
medium
slow
Display off
Note:
– Error messages will still appear, even with the display off.
5.6.5 Enable/disable keylock
The keylock can be enabled to prevent unauthorised changes to the device settings.
Basic EF
b.EF
Basic Adv. Functions
Lock
Locks the keys
Lock Device
___
0 - 999
Selection menu
The keylock will be enabled after entering at least one digit > 0. A dot indicates the active digit during this input.
Setting range:
000 to 999
– Use the key to open the list of values:
– Enter the digit using the
and
keys (0 to 9) and press the key to confirm. The active digit
will move one place to the right.
– Lastly, press the key to confirm the code.
The device will now return to the submenu.
Note:
– To disable the keylock enter: 000
15
Bühler Technologies GmbH
BE100022 ◦ 11/2020
Summary of Contents for Nivotemp NT MD
Page 38: ......
