Nivotemp NT MD
5.3 General key functions
The keys below the display are used for operation.
The menu controls are detailed in the following chapters.
Key
Mode
Function
– Measurement display:
Change measured variables displayed.
– In the menu:
Move down one menu level.
Move up one menu level.
– At the end of the menu:
The display indicates the end of the menu.
– Following input/selection:
Confirm and save a numerical value entered or a function selection. The dis-
play will flash if a parameter has been changed.
– Measurement display:
Displays the configuration.
– In the menu:
Scroll up menu item, numerical value or function selection. Holding the key
will continuously scroll.
– Measurement display:
Go to main menu.
– In the menu:
Scroll down menu item, numerical value or function selection. Holding the key
will continuously scroll.
+
– In the menu:
Exit the main / sub / drop-down menu and return to displaying the measure-
ment without saving changes to the parameters.
+
– In the menu:
Move to the next higher menu level.
60 s no action – In the menu:
Exit the main / sub/ drop-down menu.
To select a menu item and to enter values:
– Open the main menu with the
key.
– Select the submenu with the
and
keys and open the submenu with the key.
– If necessary, select the next submenu with the
and
keys and open with the key.
– Select the desired menu item with the
and
keys and open the list of values with the key.
– Set the value with the
and
keys and confirm with the key. The new settings will the saved and the device will return
to the submenu.
– Select the menu item EXIT to exit the submenu and confirm with the key. The device will return to the next menu level up
or to the measurement display.
5.4 Keylock enabled
With the keylock enabled, selecting the menu with the
key will display
in place of the main menu. The active
digit will be indicated by a dot.
– Use the
and
keys to enter the code and confirm with the key. The active digit will move one place to the right. After
entering the 3rd digit the main menu will open.
If the wrong code is entered, the device will return to the measurement display. If you forgot the password you can always enter
master code 287 to access the menu.
You can cancel the keylock under
Loc
in submenu
Basic Settings Advanced Options
b.EF
and enter 000 to reset the code.
12
Bühler Technologies GmbH
BE100022 ◦ 11/2020
Summary of Contents for Nivotemp NT MD
Page 38: ......
