WLI-UC-GNHP User Manual
63
Appendix
150 Mbps Mode settings
By default, 150 Mbps mode on your AirStation wireless client is set to OFF. Use the utility software
AirStation Bandwidth 20/40MHz Select Tool
, which comes with this unit, to turn on 150 Mbps mode.
To configure it:
1. Click “
Start
”
> “
All Programs
” > “
BUFFALO
” > “
AirStation Utility
” > “
AirStation Bandwidth
20/40MHz Select Tool
” and launch the utility software.
If you are using Windows Vista and the message "
A program needs your permission to
continue
" is displayed, click “
Continue
”.
2. When the message "
Now start the step wizard of Bandwidth Select Tool
" is displayed, click
“
Next
”
.
3. Click “
Next”
.
4. When the message "
Select of wireless adapter
", select this unit and click “
Next”
.
5. Select "
Use 150Mbps Mode (40MHz)
", and click “
Next
”
.
6. When the message "
Wireless adapter setting is competed.
" is displayed, click “
Exit to setup”
.
If you still cannot establish a 150 Mbps communication speed, check the settings on your access
point.
