17
MA112680_39.3
[Original Instructions]
4/2014
Operation
Cutting a Specimen
Select the appropriate BLADE SPEED, FEED RATE, and CUTTING LENGTH parameters to cut
a specimen.
All the necessary functions will automatically activate when the CUTTING CYCLE button is
pressed to the ON position. The CUTTING CYCLE command is accessible in the L1, L2, and L3
display screens.
DANGER
!
Personal Injury. The IsoMet 4000 Linear Precision Saw is designed to only operate
with the cover closed. Efforts to defeat the safety interlock could result in
personal injury and void warranty
.
Single Cut
1. Adjust the BLADE SPEED, FEED RATE, and CUTTING LENGTH
•
Press the SCROLL button until the desired parameter is highlighted and adjust the
parameter values using the INCREASE or DECREASE buttons.
2. Position the specimen using any of the required chucks.
3. Use the SCROLL button to scroll to the L1 Screen.
4. Press the PUMP MOTOR button to the ON position and position the coolant flow as desired
5. Press the CUTTING CYCLE button to the ON position. The blade will begin to rotate at the
selected speed, the coolant will begin to flow, and the automatic feed will begin to advance.
As the blade advances the numerical value on the display screen will start to decrease.
6. After the blade has reached the set CUTTING LENGTH, the coolant pump and feed system
will shut down.
7. Manually return the blade to the start position by way of the hand crank on the front of the
saw.
