15
MA112680_39.3
[Original Instructions]
4/2014
3. Program this value into the CUTTING LENGTH field.
The DISTANCE REMAINING parameter field will change to the CUTTING LENGTH
parameter field when highlighted with the SCROLL button.
BLADE
SPEED
600 rpm
FEED
RATE
.75 in/min
CUTTING
LENGTH
.60 in
a. Press the SCROLL
button until the CUTTING LENGTH parameter field is
highlighted.
b. Use the INCREASE or DECREASE buttons to change the value to equal the
REMAINING DISTANCE value. The value will automatically be saved.
4. Turn the crank clockwise to position the blade behind the specimen. The value under
REMAINING DISTANCE does not have to equal .00 in (or .00 mm) after repositioning the
blade.
5. Reposition the specimen and tighten the vise to prevent the specimen from moving.
Figure 5 Positioning the specimen
Figure 6 Blade behind the specimen
Figure 7 Blade almost touching the specimen
Figure 8 Blade traveling the width of the cut
