7
MA112680_39.3
[Original Instructions]
4/2014
External Recirculating System
WARNING
!
Personal Injury. Disconnect the power supply before performing any maintenance or adjustments.
1. Determine a location for the External Recirculating System.
2. Set the tank on a four-wheeled recirculating cart (P/N 16-1497).
3. Slide the 1-inch drain hose over the drain outlet pipe and secure the drain hose with the supplied
hose clamp (see Figure 2)
4. Connect the water supply hose to the supply fitting on the recirculating tank
(see Figure 3).
Figure 2 1-inch drain outlet pipe
Figure 3 Supply fitting on the recirculating tank
5. Connect the power cord from the saw to the 12-volt power plugs from the saw to the banana plugs on
the recirculating tank (see Figure 3).
a. Plug the BLACK banana plug into the BLACK connector.
b. Plug the RED banana plug into the RED connector.
6. Fill the recirculating tank with seven (7) gallons of
mixed
coolant or until the mixed coolant reaches the top of
the
first or third baffle (see Figure 4).
7. Insert the drain hose into the large hole on the
recirculating tank. The drain hose can be cut to length
to
facilitated easier installation.
8. The front control panel command buttons operate the
External Recirculating Tank.
Fill to this level.
Figure
4
External Recirculating Tank Baffles
