SAFETY PRECAUTIONS
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
complies with our interpretation of applicable sections of the * American Society of Mechanical Engineers Code B30.16
“Overhead Hoist” and the Occupation Safety and Health Act.
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
Budgit industrial hoists. We recommend the use of equipment that meets state and national safety codes. Budgit cannot
be responsible for applications other than those for which Budigit equipment is recommended.
Consult Budgit for any usage of Series 622 Hoists that do not involve raising of the load on the lower hook, or usage of
Series 622 Hoists in the inverted position. Using hoists, without special precautions, in such applications may cause an accident that could result in
injury and/or property damage.
* Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A
.
THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED
COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL AND ANY PROVIDED WITH THE
EQUIPMENT BEFORE ATTEMPTING TO OPERATE YOUR SERIES 622 HOIST.
DO’S AND DO NOT’S
Safe Operation of Hoists
The following are
Do’s
and
Do Not’s
for safe operation of
overhead hoists. Taking precedence over any specific rule
listed here, however, is the most important rule of all,
USE
COMMON SENSE
. A few minutes spent reading these
rules can make an operator aware of dangerous practices
to avoid and precautions to take for his own safety and the
safety of others. Frequent examinations and periodic in-
spections of the equipment as well as a conscientious ob-
servance of safety rules may save lives as well as time and
money.
1.
DO
read ASME B30.16 Safety Standard for
Overhead Hoists and this manual thoroughly.
2.
DO
be familiar with hoist operating controls,
procedures and warnings.
3.
DO
make sure the hoist suspension hook is
securely attached to a suitable support.
4.
DO
maintain firm footing or be otherwise secured
when operating hoist.
5.
DO
make sure that load slings or other approved
single attachments are properly sized
and seated in the hook saddle.
6.
DO
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
7.
DO
make sure that load is free to move and will
clear all obstructions.
8.
DO
take up slack chain carefully, check load
balance, lift a few inches (centimeters) and
check load holding action before continuing.
9.
DO
make sure that all persons stay clear of the
suspended load.
10.
DO
avoid swinging of load or load hook.
11.
DO
protect load chain from weld spatter or
other damaging contaminants.
12.
DO
promptly report any malfunction, unusual
performance, or damage of the hoist.
13.
DO
inspect hoist regularly, replace damaged or
worn parts, and keep appropriate records of
maintenance.
14.
DO
use Budgit parts when repairing a hoist.
15.
DO
use hook latches wherever possible.
16.
DO
apply lubricant to the load chain as recommended
in this manual.
17.
DO
replace damaged or malfunctioning hook
latch.
18.
DO NOT
lift more than rated load.
19.
DO NOT
use damaged hoist or hoist that is not
working correctly.
20.
DO NOT
use the hoist with twisted, kinked,
damaged or worn chain.
21.
DO NOT
lift a load unless chain is properly
seated in chain wheel(s).
22.
DO NOT
use load chain as a sling or wrap
chain around the load.
23.
DO NOT
lift a load if any binding prevents equal
loading on all supporting chains.
24.
DO NOT
apply the load to the tip of the hook.
25.
DO NOT
operate unless load is centered under
hoist.
26.
DO NOT
operate hoist with other than manual
power.
27.
DO NOT
permit more than one operator to pull
on a single hand chain at one time.
28.
DO NOT
allow your attention to be diverted
from operating the hoist.
29.
DO NOT
operate the hoist beyond limits of load
chain travel.
30.
DO NOT
use hoist to lift, support or transport
people.
31.
DO NOT
lift loads over people.
32.
DO NOT
leave a suspended load unattended
unless specific precautions have been taken.
33.
DO NOT
allow sharp contact between two
hoists or between hoist and obstructions.
34.
DO NOT
allow the chain or hook to be used as
a ground for welding.
35.
DO NOT
allow the chain or hook to be touched
by a live welding electrode.
36.
DO NOT
remove or obscure the warnings on
the hoist.
37.
DO NOT
adjust or repair a hoist unless qualified
to perform hoist maintenance.
38.
DO NOT
attempt to lengthen the load chain or
repair damaged load chain.
WARNING
- To Avoid Injury:
2
BUDGIT HOIST PARTS AND SERVICES ARE AVAILABLE
IN THE UNITED STATES AND IN CANADA
As a Budgit Hoist and Trolley user you are assured of reliable repair and parts services through a network of Master Parts
Depots and Service Centers that are strategically located in the United States and Canada. These facilities have been se-
lected on the basis of their demonstrated ability to handle all parts and repair requirements promptly and efficiently. To
quickly obtain the name of the Master Parts Depot or Service Center located nearest you, call (800) 888-0985. Fax: (716)
689-5644.
Overhead Hoists and this manual thoroughly.
be familiar with hoist operating controls,
Overhead Hoists and this manual thoroughly.
Overhead Hoists and this manual thoroughly.
make sure the hoist suspension hook is
- To Avoid Injury:
21.
22.
20.
DO NOT
damaged or worn chain.
DO NOT
damaged or worn chain.
damaged or worn chain.
DO NOT
DO NOT
working correctly.
DO NOT
working correctly.
working correctly.
in this manual.
replace damaged or malfunctioning hook
lift more than rated load.
use damaged hoist or hoist that is not
use Budgit parts when repairing a hoist.
use hook latches wherever possible.
use Budgit parts when repairing a hoist.
use Budgit parts when repairing a hoist.
apply lubricant to the load chain as recommended
use hook latches wherever possible.
use hook latches wherever possible.
* Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A
worn parts, and keep appropriate records of
Series 622 Hoists in the inverted position. Using hoists, without special precautions, in such applications may cause an accident that could result in
* Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A
ent that could result in
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
Budgit industrial hoists. We recommend the use of equipment that meets state and national safety codes. Budgit cannot
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
servance of safety rules may save lives as well as time and
read ASME B30.16 Safety Standard for
Overhead Hoists and this manual thoroughly.
read ASME B30.16 Safety Standard for
read ASME B30.16 Safety Standard for
WARNING
- To Avoid Injury:
to avoid and precautions to take for his own safety and the
safety of others. Frequent examinations and periodic in-
to avoid and precautions to take for his own safety and the
to avoid and precautions to take for his own safety and the
spections of the equipment as well as a conscientious ob-
safety of others. Frequent examinations and periodic in-
safety of others. Frequent examinations and periodic in-
servance of safety rules may save lives as well as time and
spections of the equipment as well as a conscientious ob-
spections of the equipment as well as a conscientious ob-
- To Avoid Injury:
overhead hoists. Taking precedence over any specific rule
listed here, however, is the most important rule of all,
overhead hoists. Taking precedence over any specific rule
overhead hoists. Taking precedence over any specific rule
. A few minutes spent reading these
listed here, however, is the most important rule of all,
listed here, however, is the most important rule of all,
rules can make an operator aware of dangerous practices
. A few minutes spent reading these
. A few minutes spent reading these
to avoid and precautions to take for his own safety and the
rules can make an operator aware of dangerous practices
rules can make an operator aware of dangerous practices
safety of others. Frequent examinations and periodic in-
to avoid and precautions to take for his own safety and the
to avoid and precautions to take for his own safety and the
spections of the equipment as well as a conscientious ob-
safety of others. Frequent examinations and periodic in-
safety of others. Frequent examinations and periodic in-
servance of safety rules may save lives as well as time and
spections of the equipment as well as a conscientious ob-
spections of the equipment as well as a conscientious ob-
for safe operation of
overhead hoists. Taking precedence over any specific rule
for safe operation of
for safe operation of
listed here, however, is the most important rule of all,
overhead hoists. Taking precedence over any specific rule
overhead hoists. Taking precedence over any specific rule
USE
overhead hoists. Taking precedence over any specific rule
overhead hoists. Taking precedence over any specific rule
. A few minutes spent reading these
17.
18.
19.
15.
16.
in this manual.
17.
DO
latch.
* Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A
worn parts, and keep appropriate records of
maintenance.
worn parts, and keep appropriate records of
worn parts, and keep appropriate records of
14.
DO
use Budgit parts when repairing a hoist.
15.
DO
use hook latches wherever possible.
use Budgit parts when repairing a hoist.
use Budgit parts when repairing a hoist.
DO
apply lubricant to the load chain as recommended
use hook latches wherever possible.
use hook latches wherever possible.
in this manual.
apply lubricant to the load chain as recommended
apply lubricant to the load chain as recommended
Series 622 Hoists in the inverted position. Using hoists, without special precautions, in such applications may cause an accid
* Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A
worn parts, and keep appropriate records of
maintenance.
worn parts, and keep appropriate records of
worn parts, and keep appropriate records of
use Budgit parts when repairing a hoist.
use hook latches wherever possible.
use Budgit parts when repairing a hoist.
use Budgit parts when repairing a hoist.
Consult Budgit for any usage of Series 622 Hoists that do not involve raising of the load on the lower hook, or usage of
Series 622 Hoists in the inverted position. Using hoists, without special precautions, in such applications may cause an accid
* Copies of this standard can be obtained from ASME Order Department, 22 Law Drive, Box 2300, Fairfield, NJ 07007-2300, U.S.A
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL AND ANY PROVIDED WITH THE
EQUIPMENT BEFORE ATTEMPTING TO OPERATE YOUR SERIES 622 HOIST.
Consult Budgit for any usage of Series 622 Hoists that do not involve raising of the load on the lower hook, or usage of
Series 622 Hoists in the inverted position. Using hoists, without special precautions, in such applications may cause an accid
THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED
COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL AND ANY PROVIDED WITH THE
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
Budgit industrial hoists. We recommend the use of equipment that meets state and national safety codes. Budgit cannot
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
be responsible for applications other than those for which Budigit equipment is recommended.
Budgit industrial hoists. We recommend the use of equipment that meets state and national safety codes. Budgit cannot
Budgit industrial hoists. We recommend the use of equipment that meets state and national safety codes. Budgit cannot
THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS WHICH IF NOT FOLLOWED
COULD ENDANGER THE PERSONAL SAFETY AND/OR PROPERTY OF YOURSELF AND OTHERS.
READ AND FOLLOW ALL INSTRUCTIONS IN THIS MANUAL AND ANY PROVIDED WITH THE
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
complies with our interpretation of applicable sections of the * American Society of Mechanical Engineers Code B30.16
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
Budgit industrial hoists. We recommend the use of equipment that meets state and national safety codes. Budgit cannot
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
complies with our interpretation of applicable sections of the * American Society of Mechanical Engineers Code B30.16
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
Each Series 622 Hand Hoist is built in accordance with the specifications contained herein and at the time of manufacture
The safety laws for elevators and for dumbwaiters may specify construction details that are not necessarily incorporated in
quickly obtain the name of the Master Parts Depot or Service Center located nearest you, call (800) 888-0985. Fax: (716)
DO
read ASME B30.16 Safety Standard for
Overhead Hoists and this manual thoroughly.
read ASME B30.16 Safety Standard for
read ASME B30.16 Safety Standard for
2.
DO
Overhead Hoists and this manual thoroughly.
Overhead Hoists and this manual thoroughly.
be familiar with hoist operating controls,
Overhead Hoists and this manual thoroughly.
Overhead Hoists and this manual thoroughly.
3.
make sure the hoist suspension hook is
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
make sure that load slings or other approved
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
6.
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
7.
make sure that load is free to move and will
closed and not supporting any part of the load.
closed and not supporting any part of the load.
clear all obstructions.
DO
take up slack chain carefully, check load
balance, lift a few inches (centimeters) and
take up slack chain carefully, check load
take up slack chain carefully, check load
check load holding action before continuing.
balance, lift a few inches (centimeters) and
balance, lift a few inches (centimeters) and
make sure that all persons stay clear of the
check load holding action before continuing.
check load holding action before continuing.
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
make sure that load is free to move and will
closed and not supporting any part of the load.
closed and not supporting any part of the load.
clear all obstructions.
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
make sure that load is free to move and will
closed and not supporting any part of the load.
closed and not supporting any part of the load.
take up slack chain carefully, check load
be familiar with hoist operating controls,
procedures and warnings.
be familiar with hoist operating controls,
be familiar with hoist operating controls,
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
DO
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
make sure the hoist suspension hook is
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
securely attached to a suitable support.
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
single attachments are properly sized
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
single attachments are properly sized
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
DO
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
DO
make sure that the hook latch, if used, is
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
DO
make sure that the hook latch, if used, is
DO
make sure that the hook latch, if used, is
closed and not supporting any part of the load.
make sure the hoist suspension hook is
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
make sure that the hook latch, if used, is
securely attached to a suitable support.
and seated in the hook saddle.
single attachments are properly sized
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
make sure that load slings or other approved
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
when operating hoist.
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
and seated in the hook saddle.
and seated in the hook saddle.
securely attached to a suitable support.
securely attached to a suitable support.
be familiar with hoist operating controls,
procedures and warnings.
be familiar with hoist operating controls,
be familiar with hoist operating controls,
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
make sure the hoist suspension hook is
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
DO
make sure that load slings or other approved
single attachments are properly sized
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
be familiar with hoist operating controls,
procedures and warnings.
be familiar with hoist operating controls,
be familiar with hoist operating controls,
procedures and warnings.
procedures and warnings.
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
single attachments are properly sized
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
be familiar with hoist operating controls,
procedures and warnings.
be familiar with hoist operating controls,
be familiar with hoist operating controls,
make sure the hoist suspension hook is
procedures and warnings.
procedures and warnings.
securely attached to a suitable support.
make sure the hoist suspension hook is
make sure the hoist suspension hook is
maintain firm footing or be otherwise secured
securely attached to a suitable support.
securely attached to a suitable support.
when operating hoist.
maintain firm footing or be otherwise secured
maintain firm footing or be otherwise secured
make sure that load slings or other approved
when operating hoist.
when operating hoist.
single attachments are properly sized
make sure that load slings or other approved
make sure that load slings or other approved
and seated in the hook saddle.
single attachments are properly sized
single attachments are properly sized
DO