Basic functions
7
25
We reserve the right to make any changes due to technical modifications.
Operating instructions RC30 programmable room thermostat • Issue 02/2006
7.3.2
Setting the room temperature for an operating mode
that is currently inactive
You can also adjust the room temperature for an operating mode
that is currently inactive.
For example, you are currently in automatic "Day" mode and would
like to alter the night setback temperature.
Hold down the "Night mode" button and at the same time select the
required room temperature with the dial.
Release the "Night mode" button. The newly selected room
temperature will be saved after approx. 2 seconds. Then the
standard display will be shown again.
Press "AUT".
The LED in the "AUT" button lights up; automatic mode is active
again.
"OFF" message
If your installer has selected "Shutdown" as the setback type, a
room temperature cannot be set for night mode (see "Why do I
need a heating program?", page 8).
+
HEAT CIRC 1
MAN
NIGHT
17.0
°
USER NOTE
If you are currently in automatic "Night mode" and you wish to
adjust the day mode, proceed as described above, but instead
hold down the "Day mode" button.
MAN
NIGHT
OFF