manualshive.com logo in svg

Buderus RC30, Operating Instructions Manual

Share
Download
Buderus RC30 Operating Instructions Manual Download Page 44

Extended functions

8

44

Operating instructions RC30 programmable room thermostat • Issue 02/2006

We reserve the right to make any changes due to technical modifications.

Next switching point

Continue to turn the dial until the next switching point is displayed.

The next switching point (Tuesday, 05:30) appears.

Change these switching points to 6:00 and 23:00 too. Continue to 
enter the new switching points in this way for the days up to and 
including Thursday. Now the system will heat from 6:00 to 23:00 
from Monday to Thursday.

Press "Back". The modified heating program is stored under the 
name "OWN PROG". Any previous own program will be 
overwritten.

USER NOTE

You can change the day of the week by pressing "Weekday" 
instead of "Time".

You can change the switch state ("On"/"Off") by pressing 
"Display" instead of "Weekday" or "Time". The switch state 
determines the operating mode: "On" = day mode, "Off" = night 
mode.

Make sure that there is an OFF switching point for every ON 
switching point so that the heating system can also switch back to 
night mode. 

Summary of Contents for RC30

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands