Special functions (additional menu)
9
60
Operating instructions RC30 programmable room thermostat • Issue 02/2006
We reserve the right to make any changes due to technical modifications.
Release the "Display" button. The end date is stored.
Now set the room temperature for the holiday function:
Hold down the "Display" button and select the required holiday
temperature with the dial.
You can enter a holiday temperature in the range from 10 °C to
30 °C (factory setting 17 °C).
Release the "Display" button. The holiday temperature is stored.
HOLIDAY
END DATE
03.01.03
USER NOTE
Make sure that the end date is after the start date. If the start and
end dates are the same, the specified holiday period is deleted.
You can cancel the holiday function at any time by setting the start
date and the end date to the same date.
+
HOLIDAY
TEMPERATURE
17
°
USER NOTE
If the RC30 or an RC20 remote control is installed in the living
room (room temperature control), then the heating only switches
on if the temperature drops below the holiday temperature in this
room.
Otherwise (outside temperature control) the room temperature is
reduced to the holiday temperature (pumps run).
USER NOTE
If the holiday function is active, only the "AUT" button LED is
illuminated. The LEDs in the "Day mode" and "Night mode"
buttons are not illuminated.
