1
Safety instructions and explanation of symbols
Logano GB125 BE US/CA - Technical specifications are subject to change without prior notice.
5
1.3
Standards, regulations and code
compliance
1.4
Notes on installation and operation
When installing and operating the heating system
observe the following:
– The local building codes regarding the installation
– The local building codes regarding combustion air sup-
ply and venting systems, and the chimney connection
– Regulations governing electrical connection to the
mains power supply
– The regulations and standards relating to the safety
systems for the water heating system
1.4.1
Other important information
– Only operate the boiler with the concentric air/venting
system specifically designed and approved for it.
– Follow the local code when connecting the conden-
sate outlet to the public sewer system.
It is the installers responsibility to ensure the
installation and operation of this heating sys-
tem meets all applicable federal, state, and
local codes.
The boiler must be installed by a qualified in-
staller and in accordance with all require-
ments of NFPA-31, "Installation of Oil-
Burning Equipment". Installation must com-
ply with all local and national legal require-
ments and the regulations of all institutions
having legislative authority with regard to the
installation of oil-fired boilers.