now!Board™ User Manual 12
8.
When installation is complete, you will see this screen. Click
Close
.
9.
To launch the software, locate now!Board
™
in your
Applications
folder. Double-click to launch. Drag
now!Board
™
from your
Applications
folder to the dock to create a shortcut.
Setting up your now!Board
™
Camera
The now!Board
™
software, camera, stylus and wand are designed to work together. Follow the on-screen
now!Board
™
software prompts and the guidelines below to position the projector, camera, and stylus for
the best performance.
Using now!Board
™
with a Projector
1.
Connect the projector to your computer. Set the
projector at the correct distance for your desired display.
The projector should be between 5' and 11' (1.5 m and
3.35 m) away from your display surface. If you are only
using the stylus (not the wand) the projector can be up
to 14' (4.25 m) away from the display surface.
Note:
Make sure your computer screen resolution is set to
1024 x 768. Most projectors will default to this setting.
To change your computer’s resolution, go to:
Windows: Control Panel > Display
Mac: Settings > Display
2.
Connect the now!Board
™
camera to your computer with
the included USB cable (Figure 15).
(Figure 15)
