Bucktool SCM8080, Instruction Manual

Page: 11 / 20

11
Grinding Tips
• Always be sure the grinding wheel is wet before grinding by having the reservoir
• Wear the proper protective clothing. Safety glasses/face shield and a
should be worn at all times.
•
grinding jig during operation. Maintain even pressure and control of the workpiece
when grinding.
• Concentrate on the task at hand. STOP grinding if other people are distracting
or your mind is on something else.
filled and in the proper location.
dust mask
Grasp the workpiece firmly and properly support it on the universal support or
Positioning the Universal Support
• The wet sharpeneris equipped with a universal support that serves as a tool rest
and as an attachment point for the sharpener jig. It can be attached in two
rotation direction of the
• The tightening knobs on each attachment point allow the universal support to be
• Working against the rotation removes large amounts of materials quickly but
does not yield precise results. Use this method for coarse tools such as axes.
• Working with the rotation yields much more precise results and removes less
positions , allowing for grinding with or against the
grinding wheel.
to be adjusted and locked in position,depending on the specific task required.
material.Use this methood for finer tools,such as knives or carving tools.
Grinding Against Wheel Rotation
an electrical power switch that
wheel to rotate in the frontand reverse directions.
Figure 6
• DISCONNECT SHARPENER
FROM POWER!
• Position the machine with the ON/OFF
switch facing you.
•
Attach the universal support in the vertical
mounts, as shown in Figure 6.
Be sure it is securely positioned and will
not move during grinding.
•
Rest your workpiece on the universal
support with the sharpened edge pointing
away from you. Grind your workpiece in
the indicated grinding area.
The sharpener additionally has been outfitted with
permits the grinding
SCM8080
OPE
RA
TING INSTRU
CTIONS