15
Sharpening
The leather stropping wheel on the sharpener and the included abrasive
stropping paste can be used to obtain a razor sharp edge on many tools. Before
use, the stropping wheel must be properly prepared.
NOTE
A slight wobble of the stopping wheel when it is rotating is normal
and does
To prepare the stropping wheel:
•
Evenly apply a light machine oil to the leather wheel. Use enough oil
a thorough coating, but not so much as to
and result in dripping.
•
Apply a thin coat of abrasive honing paste
wooden spreader or similar device. Distribute the paste evenly by hand-turning
the wheel while spreading.
•
Connect the machine to power, then
turn the machine on and continue to
distribute the paste, still using the
wooden spreader. Move the spreader
lightly in a circular motion across the
•
Once the paste is evenly distributed,
begin sharpening.
•
These preparations will be sufficient
for sharpening five to ten tools. If you
notice a drop in sharpening performance
or have sharpened more than ten tools,
repeat the above steps.
Fig. 1
Fig. 5
Fig. 2
Fig. 4
Fig. 3
Fig. 6
to provide
saturate the leather
to the leather wheel using a
wheel.
SCM8080
Figure 11
not affect the performance.
OPE
RA
TING INSTRU
CTIONS
Summary of Contents for SCM8080
Page 17: ...17 EXPLODED VIEW SCM8080...